Maintenance Plans
Protect Your Furnace.
Protect Your Furnace.
Avoid Costly Breakdowns.
Annual maintenance keeps your heating system running safely and efficiently — and catches small problems before they become expensive emergencies. Pricing coming soon.
✓
TSSA-Certified Technicians
✓
All Makes & Models
✓
Cancel Anytime
TSSA Licensed
Licensed & insured
15+ Years
GTA experience
5,000+
Systems maintained
5.0 Rating
Google Reviews
No Contracts
Cancel anytime
What's Included
22-Point Furnace Inspection & Tune-Up
Every maintenance visit includes a comprehensive inspection of your entire heating system — not just a quick look. Here's exactly what our TSSA-certified technician checks:
1 Thermostat calibration & operation
2 Gas pressure & gas valve test
3 Heat exchanger inspection for cracks
4 Burner assembly cleaning & adjustment
5 Flame sensor cleaning
6 Ignitor inspection & test
7 Blower motor & wheel inspection
8 Blower motor amp draw test
9 Inducer motor inspection
10 Belt tension check (if applicable)
11 Condensate drain & trap cleaning
12 Flue pipe & venting inspection
13 Carbon monoxide safety test
14 Electrical connections tightened
15 Wiring & control board inspection
16 Safety limit switch test
17 Pressure switch test
18 Air filter inspection & replacement
19 Return & supply airflow check
20 Temperature rise measurement
21 Overall system performance test
22 Full written report & recommendations
Why Maintenance Matters
6 Reasons to Get a Maintenance Plan
Regular maintenance isn't just about avoiding breakdowns — it's about safety, efficiency, and peace of mind.
Safety First
Carbon monoxide testing and heat exchanger inspection catch dangerous issues before they become hazards.
Extend Equipment Life
A well-maintained furnace lasts 18–20 years. Without maintenance, expect 12–15 years at best.
Lower Energy Bills
A dirty furnace works harder and uses more gas. Annual tune-ups keep efficiency at manufacturer spec.
Prevent Breakdowns
80% of furnace failures are preventable with regular maintenance. Don't wait for a cold night to find out.
Protect Your Warranty
Most manufacturers require annual professional maintenance to keep your warranty valid.
Priority Service
Plan members get bumped to the front of the line when emergencies happen. No waiting in queue.
Plans & Pricing
Choose the Right Level of Protection
All plans include our full 22-point inspection. Choose the coverage level that fits your budget and peace of mind.
Basic
Coming Soon
Annual tune-up only
- ✓ 22-point furnace inspection
- ✓ Burner & flame sensor cleaning
- ✓ Filter check
- ✓ CO safety test
- ✓ Written report
- — No parts & labour coverage
- — No priority scheduling
- — No filter included
Most Popular
Standard
Coming Soon
Tune-up + filter + priority service
- ✓ Everything in Basic
- ✓ Annual filter replacement included
- ✓ Priority scheduling
- ✓ 15% discount on all repairs
- ✓ No overtime charges
- — Parts & labour not covered
Full Protection
Coming Soon
Parts, labour & maintenance — all-in
- ✓ Everything in Standard
- ✓ Parts & labour coverage
- ✓ No repair bills — period
- ✓ Extended warranty coverage
- ✓ Annual filter replacement included
- ✓ Can pay for itself in one repair
Pricing is approximate — call 1-855-539-4328 for an exact quote tailored to your system. Multi-unit and boiler plans available.
Furnace Filters
Choosing the Right Furnace Filter
Your furnace filter is the single most important thing you can maintain yourself. A clogged filter is the #1 cause of furnace breakdowns. Here's what you need to know:
Fibreglass (Disposable)
MERV 1–4
Basic protection — catches large dust particles. Cheapest option but provides minimal air quality improvement. Replace monthly. Good for: rental properties, basic needs.
Pleated (Most Common)
MERV 8–11
Best balance of filtration and airflow. Catches dust, pollen, mould spores, and pet dander. Replace every 2–3 months. Good for: most homes, pet owners, allergy sufferers.
High-Efficiency (HEPA-style)
MERV 13–16
Hospital-grade filtration. Catches bacteria, smoke particles, and fine allergens. Can restrict airflow — confirm your furnace supports it. Replace every 3–6 months.
Pro Tip: Check Your Filter Monthly
Hold it up to light — if you can't see through it, replace it. A dirty filter makes your furnace work harder, drives up gas bills, and can cause overheating shutdowns. Our Standard and Full Protection plans include annual filter replacement.
Year-Round Care
Seasonal Heating Maintenance Schedule
Different seasons bring different demands on your heating system. Here's what to focus on throughout the year:
🍂 Fall
September – November
Annual tune-up — Schedule before heating season. Replace filter, test ignitor, clean burners. This is when we do your plan visit.
❄️ Winter
December – February
Monitor & maintain — Check filter monthly (heavy use). Clear snow from vents. Listen for unusual noises. Plan members: call for priority service if issues arise.
🌱 Spring
March – May
Transition check — Replace filter. Check thermostat for cooling mode. Schedule AC tune-up if you have a dual plan.
☀️ Summer
June – August
Off-season prep — Good time for upgrades or replacements. Best pricing on new equipment. Clear area around furnace.
FAQ
Heating Maintenance Questions
How often should I get my furnace serviced?
Once a year, ideally in the fall before heating season. This catches problems before you need the furnace most. All our plans include one annual visit — we'll remind you when it's time.
What's the difference between the three plans?
Basic gets you the annual tune-up. Standard adds a free filter replacement, priority scheduling, and 15% off repairs. Full Protection covers everything — parts, labour, and maintenance — so you never pay for a repair. Most homeowners with furnaces over 5 years old choose Standard or Full Protection.
Can I cancel my plan at any time?
Yes. There's no long-term contract. Cancel anytime with no penalty. We keep customers because the value is real, not because of fine print.
Do you service boilers too?
Absolutely. Our heating maintenance plans cover furnaces and boilers. The inspection checklist is adapted for your specific system type. Call us and we'll set up the right plan for your equipment.
How often should I change my furnace filter?
Standard pleated filters (MERV 8–11) should be checked monthly and replaced every 2–3 months. If you have pets, allergies, or a dusty home, check more often. Our Standard and Full Protection plans include annual filter replacement — but you should still check between visits.
What brands do you service?
All of them. Keeprite, Lennox, Carrier, Goodman, Trane, Rheem, York, Daikin, Amana, American Standard, Bryant, Coleman, Napoleon, Bosch — and every other brand sold in Canada. Our technicians are factory-trained on all major brands.
Is furnace maintenance really necessary?
Short answer: yes. A well-maintained furnace lasts 5–8 years longer, uses less gas, and is far less likely to break down on the coldest night of the year. It's also required by most manufacturers to keep your warranty valid. Think of it like an oil change for your car — skip it and you'll pay more later.
Service Areas
GTA Heating Maintenance Coverage
We service furnaces and boilers across the Greater Toronto Area, 7 days a week.
Toronto
Mississauga
Brampton
Vaughan
Markham
Richmond Hill
Oakville
Burlington
Milton
Ajax
Pickering
Whitby
Oshawa
Scarborough
Etobicoke
North York
Newmarket
Aurora
King City
Caledon